enLink Status-T – LoRaWAN Temperature Probes
Temperature values can be sent at regular intervals. Also, the unit can be configured, using a simple...
Temperature values can be sent at regular intervals. Also, the unit can be configured, using a simple menu system when connected via a USB cable. This allows High, Low, In-Band and Out-of-Band temperature thresholds to be set. The unit can also be configured to transmit alert messages when the alarm status changes. A heartbeat message is also sent periodically to provide assurance that the system is operating correctly. Long range LoRa wireless transmits the data for up to 16 km with deep in building penetration of 1—2 km without repeaters.
Data can be received by any LoRaWAN gateway and forward data to the Cloud where it can be analysed using enVision or third-party applications.
Sensors
Accuracy: ±0.5°C (-10 to +85°C)
Fully digital sensor
Resolution: 0.1°C
Waterproof
Long range LoRa wireless transmits the data for up to 16 km with deep in building penetration of 1—2 km without repeaters. Data can be received by any LoRaWAN compliant gateway or enLink Hub to forward data to the Cloud where it can be analysed using enVision or third party applications.
- Probe: Stainless Steel
- Probe size: 6mm x 50mm
- Cable length: 1 metre (others on request)
| Model | Number of Temperature Probes |
| ENL-STS-T1 | 1 |
| ENL-STS-T2 | 2 |
Battery Powered
- Battery life 3+ years
- Can be installed in minutes
Easy installation & setup
- Supplied with stainless steel temperature probes
- Compact size 129mm x 67mm x 41mm
- Available in 868MHz and 915MHz frequencies
- Full configuration and monitoring via USB
- Available with IP67 (NEMA 4X, 13) seal
Applications
- Pressure sensor
- pH sensors
- Gas sensors
- Flow sensors
- Level sensors
- Temperature sensors
- Proximity sensors
- High current measurement (CT’s)
